![genlaw-icml-2024](https://writelatex.s3.amazonaws.com/published_ver/37391.jpeg?X-Amz-Expires=14400&X-Amz-Date=20240831T230303Z&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAWJBOALPNFPV7PVH5/20240831/us-east-1/s3/aws4_request&X-Amz-SignedHeaders=host&X-Amz-Signature=3ed2f78f4060c470543319023d166f03500b80a93b6f00b38e1bc5ecb3dcde29)
genlaw-icml-2024
Author
The GenLaw Center
Last Updated
a month ago
License
Creative Commons CC BY 4.0
Abstract
Optional template for accepted papers to the 2nd Workshop on Generative AI and Law
![genlaw-icml-2024](https://writelatex.s3.amazonaws.com/published_ver/37391.jpeg?X-Amz-Expires=14400&X-Amz-Date=20240831T230303Z&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAWJBOALPNFPV7PVH5/20240831/us-east-1/s3/aws4_request&X-Amz-SignedHeaders=host&X-Amz-Signature=3ed2f78f4060c470543319023d166f03500b80a93b6f00b38e1bc5ecb3dcde29)
%%%%%%%% ICML 2024 EXAMPLE LATEX SUBMISSION FILE %%%%%%%%%%%%%%%%%
\documentclass{article}
% Recommended, but optional, packages for figures and better typesetting:
\usepackage{microtype}
\usepackage{graphicx}
\usepackage{subfigure}
\usepackage{booktabs} % for professional tables
% hyperref makes hyperlinks in the resulting PDF.
% If your build breaks (sometimes temporarily if a hyperlink spans a page)
% please comment out the following usepackage line and replace
% \usepackage{icml2024} with \usepackage[nohyperref]{icml2024} above.
\usepackage{hyperref}
% Attempt to make hyperref and algorithmic work together better:
\newcommand{\theHalgorithm}{\arabic{algorithm}}
% Use the following line for the initial blind version submitted for review:
% \usepackage{icml2024}
% If accepted, instead use the following line for the camera-ready submission:
\usepackage[accepted]{icml2024}
% For theorems and such
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{mathtools}
\usepackage{amsthm}
% if you use cleveref..
\usepackage[capitalize,noabbrev]{cleveref}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% THEOREMS
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\theoremstyle{plain}
\newtheorem{theorem}{Theorem}[section]
\newtheorem{proposition}[theorem]{Proposition}
\newtheorem{lemma}[theorem]{Lemma}
\newtheorem{corollary}[theorem]{Corollary}
\theoremstyle{definition}
\newtheorem{definition}[theorem]{Definition}
\newtheorem{assumption}[theorem]{Assumption}
\theoremstyle{remark}
\newtheorem{remark}[theorem]{Remark}
% Todonotes is useful during development; simply uncomment the next line
% and comment out the line below the next line to turn off comments
%\usepackage[disable,textsize=tiny]{todonotes}
\usepackage[textsize=tiny]{todonotes}
% The \icmltitle you define below is probably too long as a header.
% Therefore, a short form for the running title is supplied here:
\icmltitlerunning{Optional Template for GenLaw '24 at ICML}
\begin{document}
\twocolumn[
\icmltitle{Optional Template for GenLaw '24 at ICML}
% It is OKAY to include author information, even for blind
% submissions: the style file will automatically remove it for you
% unless you've provided the [accepted] option to the icml2024
% package.
% List of affiliations: The first argument should be a (short)
% identifier you will use later to specify author affiliations
% Academic affiliations should list Department, University, City, Region, Country
% Industry affiliations should list Company, City, Region, Country
% You can specify symbols, otherwise they are numbered in order.
% Ideally, you should not use this facility. Affiliations will be numbered
% in order of appearance and this is the preferred way.
\icmlsetsymbol{equal}{*}
\begin{icmlauthorlist}
\icmlauthor{Firstname1 Lastname1}{equal,yyy}
\icmlauthor{Firstname2 Lastname2}{equal,yyy,comp}
\icmlauthor{Firstname3 Lastname3}{comp}
\icmlauthor{Firstname4 Lastname4}{sch}
\icmlauthor{Firstname5 Lastname5}{yyy}
\icmlauthor{Firstname6 Lastname6}{sch,yyy,comp}
\icmlauthor{Firstname7 Lastname7}{comp}
%\icmlauthor{}{sch}
\icmlauthor{Firstname8 Lastname8}{sch}
\icmlauthor{Firstname8 Lastname8}{yyy,comp}
%\icmlauthor{}{sch}
%\icmlauthor{}{sch}
\end{icmlauthorlist}
\icmlaffiliation{yyy}{Department of XXX, University of YYY, Location, Country}
\icmlaffiliation{comp}{Company Name, Location, Country}
\icmlaffiliation{sch}{School of ZZZ, Institute of WWW, Location, Country}
\icmlcorrespondingauthor{Firstname1 Lastname1}{first1.last1@xxx.edu}
\icmlcorrespondingauthor{Firstname2 Lastname2}{first2.last2@www.uk}
% You may provide any keywords that you
% find helpful for describing your paper; these are used to populate
% the "keywords" metadata in the PDF but will not be shown in the document
\icmlkeywords{Machine Learning, ICML}
\vskip 0.3in
]
% this must go after the closing bracket ] following \twocolumn[ ...
% This command actually creates the footnote in the first column
% listing the affiliations and the copyright notice.
% The command takes one argument, which is text to display at the start of the footnote.
% The \icmlEqualContribution command is standard text for equal contribution.
% Remove it (just {}) if you do not need this facility.
%\printAffiliationsAndNotice{} % leave blank if no need to mention equal contribution
\printAffiliationsAndNotice{\icmlEqualContribution} % otherwise use the standard text.
\begin{abstract}
This document provides a basic paper template and submission guidelines.
If using this (optional) template, your short abstract should go here.
\end{abstract}
\section{Section example}
\label{sec}
This is a section with an itemized list.
\begin{itemize}
\item Item 1
\item Item 2
\end{itemize}
\subsection{Subsection example}
This is a subsection.
\subsubsection{Subsubsectione example}
This is a subsubsection.
\section{Submitting Final Camera-Ready Copy}
Since our workshop is interdisciplinary, we do not require any specific final template for camera-ready.
For example, if you work primarily in law, please feel free to submit a PDF version of a standard law-reviewe formatted paper. If your paper was a Fast Track paper that was already accepted for publication elsewhere, there is no need to re-format the paper using this template (unless you want to). You are free to submit a PDF of the paper that was already accepted for publication, in the format of that publication venue. We will label the paper as a Fast Track paper on the website.
If you do choose to use this \textbf{\LaTeX} style file, upon acceptance, please change
$\mathtt{\backslash usepackage\{icml2024\}}$ to
$$\mathtt{\backslash usepackage[accepted]\{icml2024\}}$$
\subsection{Camera-Ready Author Information}
\label{final author}
Affiliations should be numbered in the order of appearance. A single footnote
block of text should be used to list all the affiliations. (Academic
affiliations should list Department, University, City, State/Region, Country.
Similarly for industrial affiliations.)
Each distinct affiliations should be listed once. If an author has multiple
affiliations, multiple superscripts should be placed after the name, separated
by thin spaces. If the authors would like to highlight equal contribution by
multiple first authors, those authors should have an asterisk placed after their
name in superscript, and the term ``\textsuperscript{*}Equal contribution"
should be placed in the footnote block ahead of the list of affiliations. A
list of corresponding authors and their emails (in the format Full Name
\textless{}email@domain.com\textgreater{}) can follow the list of affiliations.
Ideally only one or two names should be listed.
A sample file with author names is included in the ICML2024 style file
package. Turn on the \texttt{[accepted]} option to the stylefile to
see the names rendered. All of the guidelines above are implemented
by the \LaTeX\ style file.
\section{Figures, Algorithms, and Tables}
\subsection{Figures}
You may want to include figures in the paper to illustrate
your approach and results. Such artwork should be centered,
legible, and separated from the text. Lines should be dark and at
least 0.5~points thick for purposes of reproduction, and text should
not appear on a gray background.
\begin{figure}[ht]
\vskip 0.2in
\begin{center}
\centerline{\includegraphics[width=\columnwidth]{icml_numpapers}}
\caption{Historical locations and number of accepted papers for International
Machine Learning Conferences (ICML 1993 -- ICML 2008) and International
Workshops on Machine Learning (ML 1988 -- ML 1992). At the time this figure was
produced, the number of accepted papers for ICML 2008 was unknown and instead
estimated.}
\label{icml-historical}
\end{center}
\vskip -0.2in
\end{figure}
Label all distinct components of each figure. If the figure takes the
form of a graph, then give a name for each axis and include a legend
that briefly describes each curve. Do not include a title inside the
figure; instead, the caption should serve this function.
Number figures sequentially, placing the figure number and caption
\emph{after} the graphics, with at least 0.1~inches of space before
the caption and 0.1~inches after it, as in
\cref{icml-historical}. The figure caption should be set in
9~point type and centered unless it runs two or more lines, in which
case it should be flush left. You may float figures to the top or
bottom of a column, and you may set wide figures across both columns
(use the environment \texttt{figure*} in \LaTeX). Always place
two-column figures at the top or bottom of the page.
\subsection{Algorithms}
If you are using \LaTeX, please use the ``algorithm'' and ``algorithmic''
environments to format pseudocode. These require
the corresponding stylefiles, algorithm.sty and
algorithmic.sty, which are supplied with this package.
\cref{alg:example} shows an example.
\begin{algorithm}[tb]
\caption{Bubble Sort}
\label{alg:example}
\begin{algorithmic}
\STATE {\bfseries Input:} data $x_i$, size $m$
\REPEAT
\STATE Initialize $noChange = true$.
\FOR{$i=1$ {\bfseries to} $m-1$}
\IF{$x_i > x_{i+1}$}
\STATE Swap $x_i$ and $x_{i+1}$
\STATE $noChange = false$
\ENDIF
\ENDFOR
\UNTIL{$noChange$ is $true$}
\end{algorithmic}
\end{algorithm}
\subsection{Tables}
You may also want to include tables that summarize material. Like
figures, these should be centered, legible, and numbered consecutively.
However, place the title \emph{above} the table with at least
0.1~inches of space before the title and the same after it, as in
\cref{sample-table}. The table title should be set in 9~point
type and centered unless it runs two or more lines, in which case it
should be flush left.
% Note use of \abovespace and \belowspace to get reasonable spacing
% above and below tabular lines.
\begin{table}[t]
\caption{Classification accuracies for naive Bayes and flexible
Bayes on various data sets.}
\label{sample-table}
\vskip 0.15in
\begin{center}
\begin{small}
\begin{sc}
\begin{tabular}{lcccr}
\toprule
Data set & Naive & Flexible & Better? \\
\midrule
Breast & 95.9$\pm$ 0.2& 96.7$\pm$ 0.2& $\surd$ \\
Cleveland & 83.3$\pm$ 0.6& 80.0$\pm$ 0.6& $\times$\\
Glass2 & 61.9$\pm$ 1.4& 83.8$\pm$ 0.7& $\surd$ \\
Credit & 74.8$\pm$ 0.5& 78.3$\pm$ 0.6& \\
Horse & 73.3$\pm$ 0.9& 69.7$\pm$ 1.0& $\times$\\
Meta & 67.1$\pm$ 0.6& 76.5$\pm$ 0.5& $\surd$ \\
Pima & 75.1$\pm$ 0.6& 73.9$\pm$ 0.5& \\
Vehicle & 44.9$\pm$ 0.6& 61.5$\pm$ 0.4& $\surd$ \\
\bottomrule
\end{tabular}
\end{sc}
\end{small}
\end{center}
\vskip -0.1in
\end{table}
Tables contain textual material, whereas figures contain graphical material.
Specify the contents of each row and column in the table's topmost
row. Again, you may float tables to a column's top or bottom, and set
wide tables across both columns. Place two-column tables at the
top or bottom of the page.
\section{Theorems and such}
The preferred way is to number definitions, propositions, lemmas, etc. consecutively, within sections, as shown below.
\begin{definition}
\label{def:inj}
A function $f:X \to Y$ is injective if for any $x,y\in X$ different, $f(x)\ne f(y)$.
\end{definition}
Using \cref{def:inj} we immediate get the following result:
\begin{proposition}
If $f$ is injective mapping a set $X$ to another set $Y$,
the cardinality of $Y$ is at least as large as that of $X$
\end{proposition}
\begin{proof}
Left as an exercise to the reader.
\end{proof}
\cref{lem:usefullemma} stated next will prove to be useful.
\begin{lemma}
\label{lem:usefullemma}
For any $f:X \to Y$ and $g:Y\to Z$ injective functions, $f \circ g$ is injective.
\end{lemma}
\begin{theorem}
\label{thm:bigtheorem}
If $f:X\to Y$ is bijective, the cardinality of $X$ and $Y$ are the same.
\end{theorem}
An easy corollary of \cref{thm:bigtheorem} is the following:
\begin{corollary}
If $f:X\to Y$ is bijective,
the cardinality of $X$ is at least as large as that of $Y$.
\end{corollary}
\begin{assumption}
The set $X$ is finite.
\label{ass:xfinite}
\end{assumption}
\begin{remark}
According to some, it is only the finite case (cf. \cref{ass:xfinite}) that is interesting.
\end{remark}
%restatable
\section{Citations and References}
We are going to use the \texttt{plainnat} format for references.
Citations within the text should include the authors' last names and
year. If the authors' names are included in the sentence, place only
the year in parentheses, for example when referencing Arthur Samuel's
pioneering work \yrcite{lee2023talkin}. Otherwise place the entire
reference in parentheses with the authors and year separated by a
comma, e.g. (for one piece) \cite{lee2023talkin}.
Please put some effort into making references complete, presentable, and
consistent, e.g. use the actual current name of authors.
If using bibtex, please protect capital letters of names and
abbreviations in titles, for example, use \{B\}ayesian or \{L\}ipschitz
in your .bib file.
\section*{Accessibility}
Authors are kindly asked to make their submissions as accessible as possible for everyone including people with disabilities and sensory or neurological differences.
Tips of how to achieve this and what to pay attention to will be provided on the conference website \url{http://icml.cc/}.
\section*{Software and Data}
If a paper is accepted, we strongly encourage the publication of software and data with the
camera-ready version of the paper whenever appropriate. This can be
done by including a URL in the camera-ready copy.
% Acknowledgements should only appear in the accepted version.
\section*{Acknowledgements}
Optional acknowledgments go here, as an unnumbered section after the main paper but before the references.
\section*{Impact Statement}
Authors are should consider including an \textbf{optional} statement of the potential
broader impact of their work, including its ethical aspects and future
societal consequences. This statement should be in an unnumbered and also at the end of the paper, before the references.
% In the unusual situation where you want a paper to appear in the
% references without citing it in the main text, use \nocite
\bibliography{example_paper}
\bibliographystyle{plainnat}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% APPENDIX
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newpage
\appendix
\onecolumn
\section{You \emph{can} have an appendix here.}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\end{document}
% This document was modified from the file originally made available by
% Pat Langley and Andrea Danyluk for ICML-2K. This version was created
% by Iain Murray in 2018, and modified by Alexandre Bouchard in
% 2019 and 2021 and by Csaba Szepesvari, Gang Niu and Sivan Sabato in 2022.
% Modified again in 2023 and 2024 by Sivan Sabato and Jonathan Scarlett.
% Previous contributors include Dan Roy, Lise Getoor and Tobias
% Scheffer, which was slightly modified from the 2010 version by
% Thorsten Joachims & Johannes Fuernkranz, slightly modified from the
% 2009 version by Kiri Wagstaff and Sam Roweis's 2008 version, which is
% slightly modified from Prasad Tadepalli's 2007 version which is a
% lightly changed version of the previous year's version by Andrew
% Moore, which was in turn edited from those of Kristian Kersting and
% Codrina Lauth. Alex Smola contributed to the algorithmic style files.